MoviesDB

saitama - Order by Related Videos

Zero Tolerance ZT 0561 : edge retention, prying (lock failure)

Channel: Cliff Stamp & Total View: 14665


Tags:
zero tolerance, zt 0561, edge retention, elmax, prying, lock, fail, failure


Add Date: May 22, 2013, 8:30 pm & Duration: 00:14:09


Likes: 104 | Dislike: 39


A brief summary :

-edge retention is improving, but is VG-10 class at best in wear
-still fairly chippy at the edge
-works best with 15+ dps edges
-far too high an angle to be useful for me still
-grindability is far too low for Murray Carter style sharpening
-blade has lots of strength for prying as does the handle
-lock does not have he security, releases trivially
-this knife was used before and the lock was effected could be a cause

Discussion :

http://www.cliffstamp.com/knives/forum/read.php?3,13881

Edge Retention - 3Cr13/420, VG-10, k390, CPM-M4 (cardboard)

Channel: Cliff Stamp & Total View: 15500


Tags:
edge retention, steel, sharp, vg-10, k390, cpm m4


Add Date: February 5, 2015, 3:16 pm & Duration: 00:13:07


Likes: 201 | Dislike: 25


In summary, four knives were compared for edge retention slicing cardboard. They had the same edge angle, apex angle/grit finish and cut the cardboard in the same way, same speed and to the same level of sharpness (1.5% of optimal).

However, for each trial the knives would in general cut different types of cardboard as it was NOT random sampled as I normally do. One one trial for example a knife might cut up mainly packing boxes for stationary supplies, but on another cut up food cartons.

This was done intentionally to look at how much scatter would be introduced into the results by different types of cardboard, all of which was 1/8" ridged. The results - even after ten trials with each knife there was no significant statistical difference among the knives.

In very short, the influence of steels on edge retention is often vastly over rated. Unless the materials being cut are extremely well constrained then all that is likely to be seen is which knife cut the easier material.

Article, which has web links to forum discussions :

-http://www.cliffstamp.com/knives/articles/cardboard.html

BÖHLER High speed steelsBÖHLER High speed steels
00:02:54July 2, 2014, 1:11 am
BÖHLER High speed steels

Channel: voestalpine BÖHLER Edelstahl GMBH & CO KG & Total View: 3974


Tags:
Böhler, Steel (Material), high-speed steel, machining, hardest


Add Date: July 2, 2014, 1:11 am & Duration: 00:02:54


Likes: 13 | Dislike: 0


Machining - a job for the hardest and toughest

Edge Retention : 3Cr13, cKc-X, O1, S30V, k390, 121REXEdge Retention : 3Cr13, cKc-X, O1, S30V, k390, 121REX
00:13:01September 26, 2014, 4:11 pm
Edge Retention : 3Cr13, cKc-X, O1, S30V, k390, 121REX

Channel: Cliff Stamp & Total View: 14144


Tags:
edge retention, sharpness, knives


Add Date: September 26, 2014, 4:11 pm & Duration: 00:13:01


Likes: 131 | Dislike: 16


Discussion thread :

http://www.cliffstamp.com/knives/forum/read.php?3,34787

Becker, cKc and Svord in the fieldBecker, cKc and Svord in the field
00:10:09May 8, 2010, 8:52 pm
Becker, cKc and Svord in the field

Channel: virtuovice & Total View: 46110


Tags:
survival, knife, KaBar, campanion


Add Date: May 8, 2010, 8:52 pm & Duration: 00:10:09


Likes: 386 | Dislike: 13


We went to get the eatable wild plants with Becker BK2, cKc Hunter, and Svord Peasant.

Canik TP9: Making Glock Scared...for $319 [FULL REVIEW]

Channel: nutnfancy & Total View: 506312


Tags:
canik tp9 review, nutnfancy tp9, best handgun, samsun yurt savunma, sys, tp40 review, xdm vs tp9, glk vs tp9, walther ppq vs tp9, walther p99 review, walther ccp, nutnfancy ktm 690, nutnfancy shooting in moto helmet, evil roy plate, best polymer pistol value, j&g sales tp9, stash pistol, cz sp01 phantom, go to war handgun nutnfancy, mekek barrel, tp9 iso 9000, hof handgun, tnp handgun, canik tp9 trigger, tp9 reliability, tp9 accuracy, tp9 muzzle flip


Add Date: May 27, 2014, 7:19 am & Duration: 00:41:22


Likes: 6304 | Dislike: 288


This gun should scare Glock. For that matter Walther, Springfield, S&W, and all the rest too. In this original review you will see why. Produced with ISO 9000 quality standards, the Canik TP9 gets right just about everything I care about. Reviewed are its toughness, reliability, accuracy, ergos, weight, firepower, and more. What results is a GTW handgun for just $319. Testing proved it is on par with all HOF GTW options in TNP. It represents screaming value, almost unheard of these days. Get it now before the price goes up and it probably will from this video. Enjoy.

Comment's archived (won't be posted) on Feb 2017...sub and watch early!

Havalon Piranta Edge : one week in review (utility and wood working)

Channel: Cliff Stamp & Total View: 17807


Tags:
havalon, piranta edge, cardboard, plastics, rope, wood craft, sharpening


Add Date: April 27, 2013, 5:25 pm & Duration: 00:15:13


Likes: 82 | Dislike: 12


One week later :

-lots of rope, cardboard, plastics, foam, webbing cut
-wood carved, pointed, notched, cut down, limbed out

An edge retention run on cardboard, standard Class I type blade which would be expected as this is a scalpel so it is likely a 3-5Cr13-15 class steel.

Very easy to sharpen this blade in a number of different ways :

a) pop off the blade sharpen as normal

b) sharpen the leading edge as normal

c) use the built in angle-guides to sharpen on a stone

Blade is very easy to take off and pup on bare handed, however it could be an issue when very cold or rushed.

The lock broke in quickly but stabilized at the half way point. No issues with it disengaging, but the low strength of the blade is likely to be the limiting factor.

Discussion :

http://www.cliffstamp.com/knives/forum/read.php?3,12647

Cardboard :

http://www.cliffstamp.com/knives/reviews/cardboard.html

BurkeCutlery video :

http://www.youtube.com/watch?v=lqsbO1w8rXE

Again that shows a rounded edge, not an edge with a high polish.

DIY Damascus HDPE Handle For Your Tools!DIY Damascus HDPE Handle For Your Tools!
00:05:03March 3, 2017, 11:55 am
DIY Damascus HDPE Handle For Your Tools!

Channel: Black Beard Projects & Total View: 58731


Tags:
damascus plastic, hdpe handle, hdpe damascus, diy hdpe, hdpe easy, how to hdpe, plastic handle tool, how to make, how to


Add Date: March 3, 2017, 11:55 am & Duration: 00:05:03


Likes: 1474 | Dislike: 49


The damascus like pattern appear because the thin plastic of the milk jar is made of three even thinner layer of which the middle one is black. HDPE can safely be melted at 180°C (356°F) but can release toxic fumes if heated more!

I hope you enjoyed :)
If so please share for more!

★Music★
Joakim Karud ► http://soundcloud.com/joakimkarud

★Follow me★
Facebook ► http://www.facebook.com/BlackBeardProjects/
Twitter ► http://twitter.com/BlackBeardProje
Instagram ► http://www.instagram.com/black_beard_projects/

★Last week video★
http://youtu.be/QTRrmEC1Hbk

Testing The Svord Peasant, Hultafors Craftsman And Bahco Laplander Part 1

Channel: Adam Savage & Total View: 2722


Tags:
Peasant, svord, hultafors, craftsman, knife, knives, bahco, laplander, Blade, test, bushcraft, safety


Add Date: October 31, 2011, 2:41 pm & Duration: 00:19:51


Likes: 8 | Dislike: 2


First part of the test videos, for the Svord Peasant knife, Hultafors Craftsman Knife, and Bahco Laplander folding saw.
Includes safety advice for tool usage.

Who's Next? - Official Mortal Kombat X Announce Trailer

Channel: Mortal Kombat & Total View: 19271091


Tags:
Mortal Kombat (Video Game), FinishHim, Fatality, WhosNext, Video Game (Industry), Trailer, Scorpion (Fictional Character), Sub-Zero (Fictional Character), MKX, Mortal Kombat X, Mortal Kombat 10, MK 10, Wiz Khalifa, Cant be Stopped, Xbox 360 (Video Game Platform), Xbox one, PlayStation 3 (Computer), Playstation 4


Add Date: June 2, 2014, 8:18 am & Duration: 00:01:57


Likes: 270394 | Dislike: 8558


Fueled by next-gen technology, Mortal Kombat X combines unparalleled, cinematic presentation with dynamic gameplay to create an unprecedented Kombat experience.

Featuring an original track by Wiz Khalifa titled "Can't Be Stopped."

www.MortalKombat.com
http://www.facebook.com/MortalKombat
Twitter: @NetherRealm

Miracle Blade III TV Infomercial- Part 2: The Perfection Series and the amazing offer

Channel: Ideal Living Official YouTube Channel & Total View: 167724


Tags:
Kitchen Knife (Culinary Tool), Chef knives, Chef Tony (Person), Miracle Blade World Class, Ideal Living, miracle blade, miracle blade knives, kitchen knife sets, cutlery, flatware, vegetable peeler, peeler, kitchen cutlery, knife block set, steak knife set, carving knife, professional knife set, as seen on tv, Infomercial (TV Genre), Chef's Knife (Culinary Tool)


Add Date: November 9, 2007, 5:43 pm & Duration: 00:09:56


Likes: 177 | Dislike: 21


Miracle Blade III Kitchen Knives from world famous Chef Tony Notaro. These amazing kitchen knives never need sharpening and provide precise control for dicing, chopping, slicing and carving. Since 1989 millions have enjoyed the quality, value and durability of Miracle Blade Knives

The Miracle Blade III Perfection Series includes two Slicers, one Rock & Chop, one Chop & Scoop, one Pairing Knife, one Boning & Filet Knife, one Kitchen Shears, & four Steak Knives.

The show is presented and hosted by Tom Jourden and Chef Tony Notaro. Visit http://www.miracleblade.com to order the amazing Miracle Blade knives today!

Svord Peasant Knife Mini: MODSvord Peasant Knife Mini: MOD
00:07:37August 17, 2014, 12:17 pm
Svord Peasant Knife Mini: MOD

Channel: Gearaholic & Total View: 5864


Tags:
iMovie


Add Date: August 17, 2014, 12:17 pm & Duration: 00:07:37


Likes: 68 | Dislike: 8


Svord peasant knife mini and how I do a modification to make it better

Sharpening : slurries, oil stones and waterstones and plateau sharpening

Channel: Cliff Stamp & Total View: 9733


Tags:
knife sharpening, water stone, oil stone, norton, plateau


Add Date: April 9, 2015, 11:08 am & Duration: 00:14:52


Likes: 163 | Dislike: 9


Discussion threads :

Ryu :

- http://www.cliffstamp.com/knives/forum/read.php?7,44955

Abrasives :

- http://www.cliffstamp.com/knives/forum/read.php?28,44347

Basic three step knife sharpening : destress the edge + shaping + finishing the apex

Channel: Cliff Stamp & Total View: 44326


Tags:
basic knife sharpening


Add Date: November 9, 2012, 5:46 pm & Duration: 00:04:18


Likes: 463 | Dislike: 20


This is a very short and simple video which shows a few key points of sharpening :

1) Destress the edge by grinding off all weakened metal by cutting into the stone

2) Grind the apex bevel until it stops reflecting light, this is just getting the edge to the right shape. It does not take an overt amount of attention or focus.

3) Finish the apex to the desired grit paying attention to minimize the burr.

To simplify the process the finishing grit was kept at the shaping grit (200 SiC) which leaves an edge with a very aggressive slicing finish but also can easily shave, slice newsprint, and is very close to a true push cut (90 degrees in all three planes) on the newsprint.

In this case when finishing the apex the angle was raised to 15 dps (the bevel was shaped at 10 dps). The increase in angle is just to add durability to the edge as this is used very roughly in the kitchen by friends and family, i.e. it will scrape out pots and the like, it isn't restricted to just cutting.

In order to get to a true 90 push cut on the newsprint all that has to be done is be a little more careful on the final finishing which means :

1) Clean the stone

2) Reduce force to the absolute minimum (5-10 grams)

Svord Mini Peasant KnifeSvord Mini Peasant Knife
00:03:59October 16, 2013, 11:11 pm
Svord Mini Peasant Knife

Channel: TaintedScarecrow & Total View: 6687


Tags:
EDC, Friction Folder, Knives, Guns, Svord


Add Date: October 16, 2013, 11:11 pm & Duration: 00:03:59


Likes: 24 | Dislike: 6


Hands on with the Svord Mini Peasant Friction Folding Knife

Edge retention as a function of micro-bevel angle : VG-10, S30V (Wicked Edge)

Channel: Cliff Stamp & Total View: 14673


Tags:
No Video Tags


Add Date: October 10, 2014, 2:36 pm & Duration: 00:12:45


Likes: 194 | Dislike: 6


Discussion thread :

http://www.cliffstamp.com/knives/forum/read.php?3,35835

In short, really short :

-if you sharpen VG-10 with an apex angle (micro-bevel) of approximately 2.5 degrees lower than S30V it has the same edge retention slicing 1/2 hemp

Shapton Pro 220 : Japanese sharpening stone - a word about pressures, areas and steel types

Channel: Cliff Stamp & Total View: 7464


Tags:
shapton pro 220, knife sharpening, pressure, area


Add Date: August 19, 2015, 4:34 pm & Duration: 00:07:24


Likes: 126 | Dislike: 9


My main point here is that commentary on stones would be very much helped if people discussed the forces and areas they were using, even if just coarse estimates, and the steel types used.

My current estimates of the LCP point on this stone :

-15n20 at sub-60 HRC, : 1.5 to 2 psi

-10V at 60+ HRC, 6 - 9 psi


Discussion thread :

- http://www.cliffstamp.com/knives/forum/read.php?7,51376

Texas Bushcraft: My First Micarta DIY (Svord)Texas Bushcraft: My First Micarta DIY (Svord)
00:23:01March 16, 2014, 8:02 am
Texas Bushcraft: My First Micarta DIY (Svord)

Channel: Texas Bushcraft & Total View: 18722


Tags:
Texas, Bushcraft, Survivalism, Wilderness, self, reliance, wildlife, survival, suvivor, knife, multitool, tarp, military, blanket, wool, camping, fun, summer, nature, hiking, outdoors, environment, primitive, living, skills, Micarta, Do It Yourself (Website Category), first, Survival Skills (TV Genre)


Add Date: March 16, 2014, 8:02 am & Duration: 00:23:01


Likes: 93 | Dislike: 28


My camera wasn't able to take great pictures of the glow in the dark layers. The layers did glow but not as bright as I would have liked. I believe its because the resin was opaque and kept it from reaching its highest potential. The Micarta turned out beautifully nonetheless.
Forum:
http://www.forum.txbushcraft.com
Website
http://www.txbushcraft.com
Facebook:
http://www.facebook.com/TexasBushcraft

SVPSGP Svord Kiwi Pig Sticker GeneralSVPSGP Svord Kiwi Pig Sticker General
00:01:29November 21, 2014, 8:56 am
SVPSGP Svord Kiwi Pig Sticker General

Channel: nozenuz & Total View: 3966


Tags:
Nože, Nůž, Knife, Knives, Cuchillo, Messer, Coltello, Couteau, Mes, Cultrum, Nóż, Faca, Kniv, SVPSGP Svord Kiwi Pig Sticker General


Add Date: November 21, 2014, 8:56 am & Duration: 00:01:29


Likes: 8 | Dislike: 0


SVPSGP Svord Kiwi Pig Sticker General Nože Nůž Knife Knives Cuchillo Messer Coltello Couteau Mes Cultrum Nóż Faca Kniv

Customer Service : The GB&U (Murrary Carter, Kershaw Knives) [plus a Wicked Edge]

Channel: Cliff Stamp & Total View: 3095


Tags:
Kai USA Ltd. (Business Operation), murray carter, wicked edge


Add Date: April 18, 2014, 9:08 am & Duration: 00:11:20


Likes: 71 | Dislike: 7


A brief commentary on customer service and interaction from the extreme Good (Murray Carter) vs the extreme Ugly (KAI).

Murray Carter :

http://www.cartercutlery.com/

Wicked Edge :

http://www.wickededgeusa.com/

KAI video overview :

http://www.youtube.com/watch?v=-V2SFrZ6IRM

A few other of the channels/people mentioned :

Kyle Bettleyon :

http://www.youtube.com/channel/UCpJR_NxKJUnr_theo8HjU_A

Mike :

http://www.youtube.com/user/gavkoo

Kyley :

http://www.youtube.com/user/knivesandstuff

DuloKnives K390 vs M390(a small test)DuloKnives K390 vs M390(a small test)
00:04:03March 26, 2013, 12:44 pm
DuloKnives K390 vs M390(a small test)

Channel: Dulo Knives & Total View: 3305


Tags:
No Video Tags


Add Date: March 26, 2013, 12:44 pm & Duration: 00:04:03


Likes: 17 | Dislike: 6


Първите ни ножове и малко тестче.
duloknives.com
Our first knives and а small test.
К390-62HRC
M390-62HRC

Svord peasant knifeSvord peasant knife
00:09:28March 7, 2014, 1:53 pm
Svord peasant knife

Channel: BushCraftBums & Total View: 21465


Tags:
bushcraft, survival, svord, camping, knife


Add Date: March 7, 2014, 1:53 pm & Duration: 00:09:28


Likes: 223 | Dislike: 6


Quick review of my favorite folding bushcraft knife

Knife Challenge 25 : Sharpening Svord small PeasantKnife Challenge 25 : Sharpening Svord small Peasant
00:01:07October 5, 2013, 9:04 am
Knife Challenge 25 : Sharpening Svord small Peasant

Channel: Cliff Stamp & Total View: 2800


Tags:
knife challenge, sharpening, svord, small peasant


Add Date: October 5, 2013, 9:04 am & Duration: 00:01:07


Likes: 19 | Dislike: 7


--Solved C amber--

The challenge :

-your friend reports he sharpens the knife, it shaves well, doesn't slice newsprint well
-he uses the knife for awhile, sharpens it again, but this time
-it doesn't shave well at all, but slices newsprint well

--

This is an interesting knife from a heavy use point of view or perspective because impacts on the spine have no lock to damage and even prying isn't a critical problem because there are no intricate internal parts to damage.

Upgrade Your Sharpmaker for Cheap!Upgrade Your Sharpmaker for Cheap!
00:08:33November 29, 2012, 10:40 pm
Upgrade Your Sharpmaker for Cheap!

Channel: Caffeine Junkie & Total View: 30058


Tags:
Aftermarket, Sharpmaker, Stones, Upgraded, Congress, Tools, SiC, Stone, Ruby, Silocon, Carbide


Add Date: November 29, 2012, 10:40 pm & Duration: 00:08:33


Likes: 164 | Dislike: 9


Link for the website is below. The stones I have are either 1"x1/8"x6" or 1"x6". The 1"x6" actually fits the Sharpmaker slots.
http://congresstools.com/congresstools/catalog?action=getcat&parent=72

Survive Knives M390 Abuse DemoSurvive Knives M390 Abuse Demo
00:04:03April 17, 2013, 5:29 pm
Survive Knives M390 Abuse Demo

Channel: SURVIVE! & Total View: 26660


Tags:
SURVIVE!, survive, knives, knife, survival, GSO, 4.1, gso 4.1, GSO-4.1, camping, bohler, m-390, m 390, stainless steel


Add Date: April 17, 2013, 5:29 pm & Duration: 00:04:03


Likes: 168 | Dislike: 13


Today, for those wondering about it's toughness, we do some abusive testing of the SURVIVE! GSO-4.1 in Bohler M-390, the current stainless offering for SURVIVE! knives.

Bohler M-390 is a premium martensitic stainless grade of knife steel, made using the particle metallurgy process. Consider Bohler M-390 for very high wear resistance (edge holding) and excellent corrosion resistance.

While no stainless grade has anywhere near the toughness of my CPM-3V high alloy tool steel offerings, being made with a particle metallurgy process, it is still certainly more than capable of tackling even the toughest cutting tasks with confidence.

We proudly work with Peter's Heat Treating of Meadville PA for all of our heat treating needs.

SURVIVE! Own the Advantage. www.SurviveKnives.com

UPDATE: The SURVIVE! Warranty.

All SURVIVE! knives are warranted for life against defects in materials and workmanship. Additionally, if your knife should ever suffer significant unintentional damage, we will replace it with a comparable model for only the cost of shipping and handling.

SURVIVE! knives are designed for use as a cutting tool, built using premium materials, to provide many years of reliable service. Use of a...

Knife Sharpening : 64 HRC k390 + Soft ArkansasKnife Sharpening : 64 HRC k390 + Soft Arkansas
00:15:01April 2, 2015, 1:55 pm
Knife Sharpening : 64 HRC k390 + Soft Arkansas

Channel: Cliff Stamp & Total View: 9625


Tags:
soft arkansas, knife sharpening, k390, norton


Add Date: April 2, 2015, 1:55 pm & Duration: 00:15:01


Likes: 127 | Dislike: 17


Writeup :

http://www.cliffstamp.com/knives/reviews/soft_arkansas.html

Knife Challenge #1 : sharpening CPM-10V Phil Wilson 62.5 HRC

Channel: Cliff Stamp & Total View: 5497


Tags:
knife challenge, sharpening, cpm-10v, phil wilson, grindability, wear resistance


Add Date: April 23, 2013, 3:44 pm & Duration: 00:03:18


Likes: 41 | Dislike: 6


--SOLVED by C Ashmore--

This will be part of a series of video's on issues and curiosities seen while working with knives. Each video will have a brief description of the problem and provide some background information. Feel free to ask questions to about specifics not mentioned in the video.

In this video the following curious behavior is noted :

-CPM 10V blade by Phil Wilson, 62.5 HRC, forced air + (l) nitrogen quench
-used for edge retention work on cardboard
-resetting the edge took 25 pps on a very cheap slow cutting stone
-resetting the edge took 125 pps on a much faster cutting waterstone

The question is how come the edge was reset (apexed) much faster on what is in general a much slower cutting stone?

Reference :

http://www.cliffstamp.com/knives/reviews/cardboard.html

Discussion :

http://www.cliffstamp.com/knives/reviews/challenges.html

Japanese Waterstone - Naniwa Superstone 400 : sharpness off of the stone

Channel: Cliff Stamp & Total View: 3340


Tags:
japanese waterstone, naniwa superstone 400, sharpness, stainless steel knife


Add Date: September 1, 2014, 5:41 pm & Duration: 00:01:25


Likes: 43 | Dislike: 2


This is just a blurb to show the sharpness off of the stone directly as a few people asked to see it after I described it.

The knife used is very difficult to sharpen as it is an inexpensive stainless steel which is prone to burr formation and apex collapse. The process used to get the sharpness shown is :

-5 pps, non-alternating
-5 pps, alternating
-5 pps, + crossing strokes (and alternating)
-5 pps, + ultra light (and crossing strokes and alternating)
-1 pps, 25 degrees
-5 pps, + ultra light (and crossing strokes and alternating)